Get in touch
Advice
Call or email for advice on choosing your stone
Template
We template for accurate measurements
Fabricate
Our skilled stonemasons fabricate in 20 000 Sq Ft workshop
Fitting
We fit 7-10 days after templating.

Discontinued

Okite Prisma Blu Capri (DISCONTINUED)

Available Thicknesses:  
Available Finishes:  

Polished

Colour:  
SKU: 4.98E+11 Category: Tag:

£375.00£580.00

Get An In-Depth Estimate

Clear

Worktop/s

Width (metres e.g. 3.0m)
Length (metres e.g. 0.6m)
+ Add More
m2

Splashback/s

This is the granite panel which can be used behind the hob, range and sink to protect the wall from splashes. You can also have full height splashbacks which are positioned on top of the granite work surface to the underside of the wall units.

Measure the length (mm) and width (mm) of each splashback piece that you require and input them into the boxes. Quote based on 20mm thickness granite.

Width (metres e.g. 3.0m)
Length (metres e.g. 0.6m)
+Add More
m2

Polishing

Select your polishing and cut out options and quantity below.

Polished Cut Out
Unpolished Cut Out
Recess Hob Cut Out
Plug Socket Cut Out
Drainer Grooves
Recessed Drainer
Tap Holes
Curves
Hob Bars
Chopping Board
Slab Supplement
Integrity Sink
Pop Up Socket Cut Out
Sub Total: £

Fitting

Select your fitting options below.

Templating (required)
Delivery/Fitting (required)
Parking Off-site
Worktop Cleaning Products
Sealant & Silicone
Sub Total: £
£
ESTIMATED TOTAL COST: £
Important Information: Whist we endeavour to provide the highest level of accuracy for your quotation from our website, it is not always possible to do so because of fluctuating material costs and other factors. Once submitted, we will check over each quotation and provide you with a more accurate quotation and breakdown. More often than not the quotation price will be reduced, so this is a good thing! We aim to get back to you within 24 hours

Your Details

Description

SKU: 4.98E+11 Category: Tag:

DISCONTINUED – Please call for alternative Quartz
OKITE is a specially developed quartz based surfacing material (about 93% quartz and 7% polyester resin) made in Italy by Seieffe Srl.
Prisma Blu Capri OKITE is available in slabs, measuring 306x140cm, with thickness ranging from 1.3cm, 2cm and 3cm used for horizontal and vertical applications. It can also be customized to fit any project.
Prisma Blu Capri Okite has a absorption rate of 0.022 percent whilst granite is the next closest at 0.2-1.0 percent. OKITE’s strength and durability are unparalleled as proven by outside independent sources that conducted tests on its physical, mechanical and environmental properties. Consequently OKITE does not require sealing or polishing.
The results of these tests confirm that against marble and granite, Prisma Blu Capri OKITE is the strongest of the three and is much more resistant to cracking, staining or breaking than any other quarried stones.In fact only three minerals : diamond, sapphire and topaz – are stronger than Prisma Blu Capri OKITE.
Additionally, OKITE withstands limited exposure to normal cooking temperatures.
Unlike marble or granite, OKITE does not require any special care or maintenance. It is resistant to staining, scratching and heat and features higher flexibility and strength as compared to other quarried stone, as well as its ability of not absorbing liquids.
With routine care, the remarkably low-maintenance OKITE will preserve its look and beauty for years to come. In addition to the product’s proven performance qualities, Prisma Blu Capri OKITE fulfils both decorative and specific design needs for commercial, institutional and residential applications.
Prisma Blu Capri OKITE® is ideal for kitchen counter tops, bath vanity tops, hotel reception areas, as well for treads and risers, floor tiles, cladding and partition walls.
Prisma Blu Capri OKITE’s versatility, beauty and outstanding performance qualities make it an extremely desirable and sought after surfacing material for all spectrums of the design industry.
For more information visit
http://www.okite.com/index2.php?lang=en

Additional information

Available Thicknesses:  
Available Finishes:  

Polished

Colour:  

Request a Call Back

Please complete the form below to get more information on our products, to get help obtaining a quotation or for general customer service assistance.



    By Checking this box you consent to your data being submitted and stored on our servers for the purposes of your enquiry only. Please see our Privacy Policy for more information.

       
    Call Now Button